Help Me Start My Bike

I have 2018 T120 no crank issue.

Few things i checked!

Theres no power at the starter, but if i directly connecter jumper cable at the starter bolt behind the rubber boot then the starter kicks in.

i checked 30amp starter solenoid fuse its good.

battery was completely dead so i connected my jumper box which is fully charge.

Also i just replaced ignition switch it came with 2 new keys from triumph. The old key no longer works in the new ignition switch. Could that in any way interfere with immobilizer system? Are the keys and ECU married to each other?

Im lost not sure what steps i need to take next.

is there a way to test starter solenoid?

kevin

 

i did verify the stand was up and clutch lever pressed all the way to handle bar.

 

So i had to also wait 3 weeks after placing an order for ignition switch it came with 2 keys.

I think you might be right the keys may need programming.

i was reading the Hayes repair manual and one way to tell if the key needs programming was that you would have a immobilizer light staying on with the ignition switched on. I didn't check that at the time i was working on the bike.

Since i order the new ignition key switch from dealers. Shouldn't my original key still work in ignition its not even turning the ignition switch.

Let me call the local Triumph dealer to make sure.

thank you guys

 

Thank you guys for all the suggestions. I really appreciate it.

Im gonna work on the bike on Saturday, I update you guys if i get it running

 

I doesn’t crank. Nothing happens no sound when i press start

 

Yes, I tried jumping it that was the first thing i did.

 

It was in an accident. The bottom part of the ignition switch is broken. front headlight is broken and forks are bent.

 

I did thought about that. If nothing else works then that's what am gonna do.

I wonder if the bottom part of the ignition switch can be swapped out with new ignition switch.