Featured Tt 600

Got my theory test tomorrow so wish me luck and if its stops snowing i will try and sort out the rat nest of wires that have all come out of the connectors

 

PASSED the test.

 

update on the project.

So i have now done the oil change and oil filter. old oil looked really bad and so did the filter. New foot pegs came today so will be mounting them and sorting out the electrics tomorrow along with giving it a good wash. i might even try sorting out the fairing if the weather holds.

 

OK. Sorry its been so long since i updated. Had a lot going on. First off. I PASSED the tests i now have a full license. The bike is up and running with new race fairings (pictures to come).

 

Here is a little pic to keep you going

 

Hi everyone. Hope you are all doing well. I've had a problem with a code that comes up p0201 injector 1 open/short circuit. There is no short no open. The think I think it could be is the fact all 4 injectors are reading between 12.6 and 12.7 ohms. I know that the manual says they have to be between 15 and 18 ohms. Would this cause this issue???

 

Hi everyone. Hope you are all doing well. I've had a problem with a code that comes up p0201 injector 1 open/short circuit. There is no short no open. The think I think it could be is the fact all 4 injectors are reading between 12.6 and 12.7 ohms. I know that the manual says they have to be between 15 and 18 ohms. Would this cause this issue???

 

Yeah other than the code that is has its almost there. Once it's back together I will post some pictures