Featured 2018 Speed Triple Rs – Ownership Thread

Hello,

I'm french please excuse me I use Google translation lol

I've been reading you for a long time

I encounter a dilemma.
I want to do a little more noise with my Speed RS

I want to remove the 2 baffles, the tube and the small disk with the hole of 5mm. However this is irreversible. If I make too much noise I can not go back and I do not want to put a screw ...

I would like to put a SC Project but it is absolutely necessary to remake a mapping of the ECU? Or simply reset the ECU what I read on the forum with 12min enough?

Thanking you.

 

Does anyone know the details around what the 12 minute reset actually does?
Is it just idle stabilisation or is there any further map adjustment /fuelling changes made as a result.
Just curious as I am thinking I should do it on mine now the exhaust is fitted and I have a few hundred miles on the clock!

 

Ta

 

RSReggie have you received your pipe yet, and if so, what are your thoughts? I'm with you on this one, I prefer this look to the shorty...but you seem to be a trail blazer, the first I've learned about to go this way...great work!

 

Hi Speed Triple RS Aus, I have not ordered one of these, I WAS interested but I want to see some dyno results first ...

 

SC is delayed with production, I received an e-mail from them earlier this week. They plan on send it at the end of this week, hopefully they do it today.
I will post a few words when I have tested it.
I will not do a dyno run with as I think the bike acts great with the stock mapping and I don’t miss any power (maybe in the future though...)

 

Hello,

I come back to write on the forum to share my experience.

I'm French, I finally ordered the exhaust Sc-Project S1 because I did not want to permanently modify the arrow exhaust

I ordered Friday morning 24/05, package sent Friday afternoon. Received today 28/05
Conclusion: SUPER FAST! Milan Italy => Metz France, 4 days

I will try to mount it today

I'll keep you informed

 

Huge bummer. I ordered the SC1-R exhaust two weeks ago now, was hoping to have it sometime this week but sounds like next week or the following is more realistic since I'm across the big blue puddle.

The S1 has been released for a while now so I'm sure they've had them on the shelf. They just released the SC1-R but I had hoped they'd have a few in inventory before spreading the word

 

Waiting for video with sound

 

And DYNO results !!!

 

I installed the Sc project S1

For the moment I'm a little mixed because the pots Arrow were big, so it's a big "empty" especially that I remove the rear feet supports
I think I will put the support back to fill the "hole"

Regarding the bike, we feel that it is lighter. It is slightly higher, I'll have to adjust the suspensions.

The idle of the bike is not very stable but it may be due to the fact that the bike was cold? I will reset the ECU with the "12min" as I read on the forum. I hope his will fix the idle of the bike

The sound with the DB Killer is perfect, neither too loud nor too light
I did not test without DB Killer, its must be too noisy lol

(I hope I make myself understood I use google translation lol)

 

Sounds good ! Will you be getting the bike dynamometer tested ?

 

No I think I will not do a Dynamo test
I'm still going to find out what price it costs

 

Well enjoy your new exhaust anyway

 

Google translate is working fine.

Can we have some photos please? I am thinking along the same lines. It will be interesting to see how the fuelling settles down !

Merci.

 

Google translate is doing a great job

Nice to hear you are happy with the sound of the can. I have the same can and have not noticed any idle instability. I did the 12 min. procedure immediately after assembly.

The empty space where the Arrows used to be is what makes the bike even more beautiful, IMO. It makes the bike look more racier. Take a look at the rear on the new Ducati V4R, it has som similarities with the speed with the SC can.

Don´t hesitate to post som pictures of your new toy. I can't get enough visual impressions of this beautiful bike

 

Hi did your sc1-r arrive ? Any news ?

 

Unfortunately it has not yet arrived. I'm going to check in with the local vendor next week

 

That must be frustrating for you ! Looking forward to hearing what you think of it !

 

Look what was laying on my door matt today, SC-1R
Hopefully I will get some time to get it installed later today.
Stay tuned...

 

Can't tease us with just the box, crack that bad boy open!