Featured 2018 Speed Triple Rs – Ownership Thread

Discussion in 'Speed Triple' started by MrTriple, Mar 31, 2018.

  1. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    :eek:

    It's been ruined (in my opinion). The previous version is way more classy.

    The white has lost its clean look...and I think the black is better, but agree that a stealthy version was called for...it didn't need lime green. It's a modern, angular look on a bike that doesn't have modern lines.
     
    • Agree Agree x 1
  2. Barryscott

    Barryscott Member

    Jul 7, 2018
    54
    18
    Tupelo, Ms, USA
    yep seeing those pic of new bike, so glad i got mine when i did
     
    • Like Like x 2
  3. RSReggie

    RSReggie Active Member

    Apr 9, 2019
    114
    43
    North West UK
    Way to spoil a good looking bike ! I guess you can always peel em off...
     
  4. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    I don't know if it's the same for these new bikes, but you can peel off the decals on a black bike, but they are underneath the gloss clear coat on the white. It was one of the reasons why I liked the white...because the decals look more permanent.

    Does anyone like the new design?
     
  5. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    Someone will have to verify the lacquer business on the black. I saw one in the showroom when I ordered mine and they could definitely be peeled off (there was a corner that had already started :confused:).
     
  6. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    No I think they look hideous and I hope the designer's feet go the same way as the pic attached...... :joy::joy::joy: (jokes)

    IMG-20140902-WA0005.jpg
     
    • Funny Funny x 2
  7. Jez1050S

    Jez1050S Well-Known Member

    Apr 16, 2019
    34
    68
    Bristol
    Not liking the new colour schemes :confounded:
    I don’t think they suite the bike at all.
    They would look at home on a Suzuki/Yamaha sports bike but not on something classy like the Speed.
    Glad I ordered mine before they changed it !! :party:
     
    • Agree Agree x 1
  8. Bad Billy

    Bad Billy Baddest Member

    Jun 1, 2017
    6,801
    1,000
    Southern Softyville
    • Like Like x 1
  9. Speed Triple RS Aus

    Speed Triple RS Aus New Member

    Nov 15, 2018
    17
    3
    Australia
    I was excited to see the new designs........but this is so disappointing, will need to get my hands on another black and red before they're gone and these hit showrooms. Any chance of them supplementing these with a good design, like the scheme on the 1200 Scrambler XE...? Somebody at Triumph must know these will impact sales, and not up.....unless they're appealing to a new customer base?
     
  10. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    Yes they certainly do - and different to the Speed that I saw a year ago. It was the dealer that pointed it out.

    Post up a full pic Andy - from that small glimpse, it looks a lovely bike :)
     
  11. Cupracing

    Cupracing Member

    Aug 12, 2018
    32
    18
    Berkshire
    Mines in on the 18th, Triumph Bulldog have said it will be £230!

    That’s as much as a major service on my car
     
  12. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    There does seem to be some variance - let's see who can come away with the cheapest service ;)

    They have free cakes on a Saturday too - I can eat my own bodyweight in cake.
     
    • Funny Funny x 2
  13. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    The Street looks really grown up these days - great bike! Great roads too, by the look of it :yum

    Stop with this teaser stuff - first a glimpse of your paintwork...now it's your ECU. Where have you sent it :neutral: ?
     
    • Funny Funny x 1
  14. Fitz Brundage

    Fitz Brundage Member

    May 11, 2018
    40
    18
    North Carolina
    A Query to Mr Triple, andyc1, and anyone else who has shed the original RS Arrow exhaust.

    I am very tempted to install the AR exhaust on my 2018 RS. I'm not interested in a performance gain so much as losing the weight and heat beside my legs. But I don't want to sacrifice the low end performance in order to shed weight.

    Alas, I live in NC and can't easily get my bike to Hilltop. Instead, I will have to take my pick to a local tuner if I swap the exhaust. So here is my question.
    Would you advise getting a dyno done before I install the AR exhaust so that the tuner has a "baseline" to work from. Or is it just a effective to swap the exhaust and let the tuner work from scratch.

    I've never had a bike re-mapped after swapping the exhaust so I may be asking an inane question. Thanks for your advice.
     
    • Like Like x 1
  15. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    This is a good (and not by any stretch inane) question Fitz Brundage, and provides a chance to summarise findings so far:
    • I am very pleased with my AR - it's beautifully made and I love the sleek lines (with no visible hanging bracket)
    • It sounds amazing and retains the original character (with baffle in)
    • The weight reduction made a significant difference to the handling - but it required a suspension tune to really shine
    • I didn't notice any performance gains - but definitely noticed torque reduction (without a doubt)
    • I wish I'd had it baselined - only because I'll never know how good it was before the change (but you really don't need to get it on the dyno first)
    • Hilltop detected and fixed the lack of torque and cured the running lean issue (I have to trust them on the lean bit)
    • I've just put the baffle back in after a period of testing - the sound was great, but just overwhelms everything (it also amplifies every imperfect throttle/clutch action)
    As said in earlier posts, it's worth emailing Hilltop and asking whether they have any 'Remote Tuners' in your area. Or you could post it, as andyc1 has done. That said, a good, local, traditional tuner will surely provide an adequate solution.
     
    • Like Like x 1
  16. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    You don’t need to get the bike to Hilltop, just the ECU
     
  17. Fitz Brundage

    Fitz Brundage Member

    May 11, 2018
    40
    18
    North Carolina
    I'm hesitant to ship my ecu across the Atlantic. A lot of opportunities for something to go wrong somewhere.

    But thanks for the advice.
     
  18. Fitz Brundage

    Fitz Brundage Member

    May 11, 2018
    40
    18
    North Carolina
    I'm hesitant to ship my ecu across the Atlantic. A lot of opportunities for something to go wrong somewhere.

    But thanks for the advice.
     
  19. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    I'm with you on that - I didn't want to send mine within the UK. Hilltop might offer a solution that isn't detectable by Triumph, but having to explain why you need a new replacement ECU set up, is pretty hard to hide :neutral:
     
  20. Ken walburn

    Ken walburn Noble Member

    Jun 28, 2017
    889
    300
    Essex
    What could possibly go wrong? You guys flew men to the moon & back, right? ;)
     
    • Funny Funny x 2
Loading...

Share This Page