Street Twin Recall

This is something that seems strange to me. The recall statement as written by Triumph says the clutch cable rubs on the wiring harness. On my 2018 Street Twin I don't see where that can happen. Or how a clutch cable can cut onto wiring. But what I do see on my bike is a very obvious is a sharp edge on the headlight bracket that can rub on the headstock wiring harness when the handle bar is turned all the way to the left. (You can see the pictures I posted up above in a previous post)

Is this what other Street Twin owners have seen? Is the clutch cable really damaging any wiring?

 

Checked my VIN and not on there. Checked with dealer as well and my bike (bought late 2018) is not on the recall. I asked what they do to fix and he said it's just a cable tidy, is that right? Got the impression there was more to it. Just had a look and I cannot see any traps left lock, potentially a little rub on right lock. Wires all seem to have extra (cloth?) wrapping, cables have a foam sleeve near the headlight.

Edit - Just found a chunk of thread above an advert and found the pictures, very helpful, thanks. So the thing to note is that the wiring loom is above the lower end of the headlight mount. On mine the loom ends up only about 1cm above the pinch point. Fine, but not knowing what is holding it up I will keep an eye to make sure it doesn't drop!

 

I think this is what a fixed one looks like, the loom just a little higher than the lower part of the headlight mount, so it isn't pinched.

 

Just checked Hugh on the Triumph site and it told me that he needs to go in for the recall too. 2017 T100.

 

Thx
My street twin is having the repair done next week. Now I know what to look for.

 

It's just a replacement cable tidy to prevent chafing resulting in bared wires. 10 minute job.

 

Well get it booked in then

 

On checking my cable,it is definitely rubbing into the loom,as I can see an indent on the loom where the clutch cable crosses,also smaller wires are beginning to show through at the same spot. Booked into dealer in April!

 

Thanks. Mine is booked to fix this Saturday. Once fixed, I will post a picture so others can see what the fix looks like.

 

Hugh had his cable fix this morning at Pure Triumph Woburn. So I got to meet Rich Bryce as well, who made me a cuppa, which was nice of him.

The existing cable guide was simply replaced with a revised one and I was on my way as soon as I'd finished my tea. It may be psychological but I'm sure the clutch felt smoother on the way home...

Still not had any official notification of the recall.

 

We’ve both had the Rich cuppa experience, I enjoyed mine too, had coffee.

 

Hi All
Took my ST into Pidcocks, Long Eaton who kindly fitted the modified headstock cable tidy. It was sorted in a matter of minutes but whle I was there, I was offered a test ride on the 2019 ST. It was ok but I didn't think it was worth the quoted £3000 to change. In fact, I like my 2017 bonnie just fine and just love the crystal white colour which is unavailable for 2019.

 

If it fits you don’t change it, I think sometimes we just change for the sake of boredom but the new one’s only a new one for a few hours

 

I have the white Street Twin as well Antony and feel much the same as you.

 

This ones about bikes Figwold

 

Good for you Notso, I wonder how many crystal white ST's were made ? There seems to be loads of red ones around. I must say though, I'm not keen on the "khaki green" colour chosen for the 2019 model, it doesn't suit it at all IMHO.

 

Just got my notice in the post today for the recall on my ‘18 Street Cup

 

Bike does look well...