Featured 2018 Speed Triple Rs – Ownership Thread

The lack of urgency you mention, maybe due to resetting the ECU more than the end can ? Maybe it will come back with some hard use .

 

Just sent a copy to the GF - hoping for some encouragement now she has a new car

 

Also Austin Racing seem to have a tuning module available for the Speed Triple.

 

I see Austin racing advertise their exhausts fit Speed triples 15 - 18. Does this mean they wont fit my 2014 model? I cant get a simple straight forward answer from Austin racing or triumph UK. I'm not aware of any changes in the exhaust system after the cat on the 14-15 models, or am I wrong? Austin racing told me they will not refund me if it does not fit. Anyone know a definative answer on this?

cheers,
Scooboo81

 

I think you need to measure your link pipe where the AR system joins then they can confirm the fit. They do 45mm 50mm 54mm. You may need to tweak the bracket. I have been speaking with Kyle trying to get a comparative dyno result without much success. He did sent a graph with one run and 125bhp which he assures me is the SPEED not the STREET...

 

The 16 model is different due to a bigger cat for euro 4 but if the 15 model is the same as the 14 then Austin racing need to update their website, as the exhausts would surely fit 2011 - 15 , 16-17 and 18.

 

You can give him some feedback on his company's customer service too !

 

Ordered mine. Went for the 110mm option carbon with titanium.

Just to be clear. I selected standard headers. Is that correct for an 18 RS? They're arrow cans but the headers are the same as the S I thought?

 

Well if its a 2018RS the headers shoudl be standard for that model.

Will be great to see pics when fitted. Also, if you are ok with this, it would be great to get feedback on performance BEFORE you reset the ECU so its a direct comparison between old and new end can. 110mm is proper stubby ! I can't imagine its very quiet !

 

Nice ! Would it pass a noise test at Oulton park do you reckon ? 102dB . Long break for Hilltop but may be worth the wait ... ? Great looking bike with that can !

 

Also I guess if you take weight off the back the rear of the bike will sit a little higher so effectively more weight bias to front so quicker steering and easier stoppies .. according to Performance Bikes the guy from K Tech reckonned the bike was too low at the rear so maybe it's the ideal solution ...buy an AR end can

 

let me know if anyone goes hilltop. i live 10 miles away and am interested in what they can do. not brave enough yet to be the first in though.

 

Oh go on Martin you ARE the nearest