Featured 2018 Speed Triple Rs – Ownership Thread

Discussion in 'Speed Triple' started by MrTriple, Mar 31, 2018.

Page 12 of 50
  1. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    #221 Rspete, Aug 24, 2018
    Hi Mr triple

    One of the members has an evotech tail tidy for sale..... it's to fit a 2016+ model...my question is will this fit the new rs?
    Just need to be sure before I purchase it.
    Many Thanks
    Pete
     
  2. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,805
    1,000
    Reading
    #222 tcbandituk, Aug 24, 2018
    My dealer swapped mine from my 2017 S model to my RS without a problem.
     
    • Like Like x 1
    • Agree Agree x 1
  3. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    #223 Rspete, Aug 24, 2018
    Many thanks for your reply mate. :laughing:
     
  4. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    #224 MrTriple, Aug 24, 2018
    Last edited: Aug 24, 2018
    Hi Pete - I transferred mine myself from my 2016 R, so yes it will fit.

    Make sure you remove the OEM rubber pad that sits between the tail tidy bracket and the mounting point on the sub frame.
     
    • Like Like x 1
    • Useful Useful x 1
  5. Cupracing

    Cupracing Member

    Aug 12, 2018
    32
    18
    Berkshire
    #225 Cupracing, Aug 24, 2018
    Is this to stop the indicators rubbing on the exhaust?
     
    • Like Like x 1
  6. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    #226 MrTriple, Aug 24, 2018
    Exactly for that reason - it's supposed to be discarded, but it's often left in by mistake...including by 'professional' fitters.
     
    • Like Like x 1
  7. Mark34

    Mark34 Member

    Aug 24, 2018
    27
    13
    London
    #227 Mark34, Aug 26, 2018
    Hi all - I'm a forum newbie so by way of brief intro - I test rode an RS on the 11th Aug at Ongar M/Cycles, and was thoroughly impressed, I'd been toying with an V4 Tuono, KTM Superduke or an MT10, but the RS ticked all the boxes for me.

    I sourced a 2nd hand 1,500 mile black one; drove to Cardiff on the 18th to collect it and set off to France on the 20th August with some mates.

    It's been a rapid introduction. I'm just back today after 1,700 miles on some of the best european roads (followed by the horrendous weather here today and the M25).

    This really is the bike that has it all. It is everything that I want from a motorcycle. It was a joy in all circumstances.

    I joined the forum a couple of days ago and have just read through this thread - much appreciated info MrTriple.

    My first priority is to get a little bit more noise, to mirror the sound of the original 955 triples that I recall having a lovely heavy base tone if at all possible. So will be keen to learn of options and whether ARacing have developed anything yet or will do in the near future.

    In any case, I'm keen to learn as much as I can.

    Cheers all,

    Mark

    IMG_0648.JPG
     
    • Like Like x 5
  8. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    #228 MrTriple, Aug 26, 2018
    What a great introduction from you there Mark - and congratulations on your pre-loved (not second-hand) RS. She looks fantastic in the photo :blush:

    That's Ongar Triumph in Dunmow (as opposed to being in Ongar)? There's a good tuning place just behind them called Race Engineering. They do a reasonably priced suspension tune, together with dyno stuff and they're also a good source for Evotech.

    I spoke to Rich Austin at AR last week - he said it was OK to mention that they are definitely working on something, potentially over the next four weeks. I believe there will be two styles, both slip-on - a low version which will undoubtedly look amazing...but also the high RS22 twin version (as per the KTM Superduke 1290 and Duke 790).

    I'm 95% certain I'll order the RS22 - which I'd guess will only need to attach to the upper mounting bracket near the rear shock and the lower bracket under the frame, leaving clean space around their fabulous stubby under-seat cans (this is just my interpretation of what they are likely to do).

    The 5% doubt, is around the fact they're pretty extreme...and LOUD. It might 'ruin' the character of the Speed Triple, which I've grown to really like. Riding behind my son's Daytona or MT-10 (both with baffles-out AR exhausts) makes my head buzz. But they sound so good :yum
     
    • Like Like x 1
  9. Mark34

    Mark34 Member

    Aug 24, 2018
    27
    13
    London
    #229 Mark34, Aug 27, 2018
    Yes indeed, it was at Ongar Motorcycles in Dunmow. Unfortunately they didn't have any pre-owned RSs in stock and I would have to wait until September for a new one, hence how I ended up on a drive over to Cardiff to buy the one I have now; but it was worth it :).

    Thanks for the info, Dunmow isn't far from me and I'm after a Evotech tail tidy as well, so I'll get in touch with them.

    Encouraging news re the AR exhausts, so I'll wait to hear further about them.

    Thanks again,

    Mark
     
  10. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    #230 MrTriple, Sep 21, 2018
  11. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    #231 Rspete, Sep 21, 2018
  12. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    #232 Rspete, Sep 21, 2018
  13. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,805
    1,000
    Reading
    #233 tcbandituk, Sep 21, 2018
    Nice styling....

    .[​IMG]
     
    • Funny Funny x 2
    • Like Like x 1
    • WTF WTF x 1
  14. Clarkey231

    Clarkey231 Noble Member

    Jun 9, 2016
    473
    313
    Exeter
    #234 Clarkey231, Sep 22, 2018
    I think I definitely prefer the low boy option as it just looks so cool! But I’m not sure about that style. The above baked bean tin (other food tins are available) is quite accurate!
     
    • Funny Funny x 1
  15. martinm

    martinm Member

    Mar 24, 2018
    27
    18
    leicester
    #235 martinm, Sep 22, 2018
    had the arrow low boy on my 2012 speed r. like the look of the standard cans on my 2018 s and was adamant they were staying.not keen on really loud exhausts but maybe 97db with the v3 wont be so bad.they look good and what a weight saving.! decision time x2.
     
    • Like Like x 2
    • Funny Funny x 1
  16. martinm

    martinm Member

    Mar 24, 2018
    27
    18
    leicester
    #236 martinm, Sep 22, 2018
    think that will be my new screen saver pic.:cool:
     
    • Like Like x 2
  17. tcbandituk

    tcbandituk TC
    Subscriber

    Apr 8, 2016
    2,805
    1,000
    Reading
    #237 tcbandituk, Sep 22, 2018
    I can do you one at half the price only £299.50!
    You will need to make your own fitting kit and remove the Heinz label though.....
    :D
     
    • Funny Funny x 2
  18. Rspete

    Rspete Elite Member

    Jun 17, 2018
    1,794
    743
    Durham
    #238 Rspete, Sep 22, 2018
    No I would leave the label.....heinz racing all the way. :p
     
    • Agree Agree x 1
  19. ellerslie

    ellerslie Well-Known Member

    Apr 16, 2018
    56
    68
    Rickmansworth
    #239 ellerslie, Sep 29, 2018
    I like the AR cans. Nothing wrong with them and they make the bike look less bulbous and top heavy at the rear
     
  20. MrTriple

    MrTriple One Cylinder Short

    Jan 23, 2017
    924
    243
    Epping Forest
    #240 MrTriple, Sep 29, 2018
    The build quality is superb and I think the simplicity will suit the bike. I've always been a fan of the twin under-seat Arrows as they define how the bike should look...however...I'm up for a change now.

    So, ignoring the opinion of those that think it looks like a tin can :p, I ordered one last week. I've gone for the 170mm GP3 in titanium, with a black ceramic GP1R tip and laser-etched logo (which looks more subtle than the regular AR sticker). It should look like this:

    GP1R BLACK TIP WITH TITANIUM CAN. ETCHED.jpg
    Clean lines :yum
     
    • Like Like x 3
Page 12 of 50
Loading...
Similar Threads - 2018 Speed Triple
  1. Linx

    * 2018 Triumph Speed Triple 1050 Rs *

    Linx, May 5, 2024, in forum: Bikes for Sale
    Replies:
    1
    Views:
    570
    Linx
    Jun 3, 2024
  2. Alan Gilbert

    Brand New Evotech Tail Tidy For 2018-2020 Speed Triple S/rs

    Alan Gilbert, Dec 7, 2021, in forum: Parts, Accessories & Clothing
    Replies:
    0
    Views:
    754
    Alan Gilbert
    Dec 7, 2021
  3. Pedro1340

    Speed Triple 2018/20 Parts Wanted

    Pedro1340, Sep 25, 2021, in forum: Wanted
    Replies:
    17
    Views:
    1,574
    Pedro1340
    Oct 28, 2021
  4. Leech

    Looking For Pillion Seat For Speed Triple R 2018 (red Stitching)

    Leech, Aug 18, 2021, in forum: Parts, Accessories & Clothing
    Replies:
    1
    Views:
    736
    Leech
    Oct 4, 2021
  5. SuperHans

    Speed Triple 16/17 Petrol/fuel Tank Same As 2018 S/rs?

    SuperHans, Apr 26, 2021, in forum: Speed Triple
    Replies:
    0
    Views:
    750
    SuperHans
    Apr 26, 2021

Share This Page

Sign up