Emulsion Tube

I am rebuilding my Kielhin Carburettor off my 2001 Thunderbird. I have sourced all the parts except the part which is most worn and probably giving me the most problems of rich mixture. No matter how low I turn the mixture it still runs rich. There was noticeable ware in the carburettor so I decided to rebuild it. However, I cant source the emulsion tubes for the carbs. Can get similar but not quite the same holing. Can anybody advise where the emulsion tube can be sourced or an alternative.

Woofa

 

Thanks

e

 

thanks

 

Thanks but no joy.

 

The number is 1240670 then there is an image that looks like O/ 1L

 

The number is 1240670 then there is an image that looks like O/ 1L

 

The carb shown in the drawing is the same carb but there shows no emulsion tube but mine has an emulsion tube. Triumph have nt a clue Daaaaaa

 

The carb shown in the drawing is the same carb but there shows no emulsion tube but mine has an emulsion tube. Triumph have nt a clue Daaaaaa

 

Yeah, that's what they have on the Triumph parts diagram. However, my bike dose nt have this jet, it has about an 1" long emulsion tube jet which also screws in from the bottom. Wonder if someone changed the jet for an emulsion tube jet instead of the short needle jet. I know the ignition coils were changed from HT cap to coils.