Recommendations For Screen That Looks Good And Works

I had the same requirement as a flyscreen did not offer much wind protection. I had a National Cycle Street EX on my Speedmaster and it was good so when I sold my Speedie I put it on the Bonneville and it works well. It’s also has QD fittings so it can be on and off in minutes. I added an MRA X- screen sport spoiler and that helps as well but not essential. When I am in a cafe racer mood I can put the flyscreen back on in minutes. Simples.See pic.

 

It’s very difficult to decide on protection or style. The smaller the screen, the less wind protection.

This is a pic of my bike with the flyscreen and it offers very little wind or bug protection but looks good.

Good luck with your search.

 

My T100 has a Dart flyscreen which tbh, is more cosmetic than useful. Still, it’s better than the white plastic Triumph item, which is neither.

 

I have a Puig Ranger screen on my Honda Magna and that may be a compromise solution. It reflects a fair bit of wind and I don’t get flies and bugs on my helmet so it works quite well.

 

Just for general info on this subject. I had fitted the Triumph long haul screen to my new T120 and it was horrendous. All the wind that would normally have hit my chest was pushed up onto my helmet with much discomfort.
I took it back to the dealership next day and had to settle for the small flyscreen as that is all Triumph had to offer. This is ok and better than no screen at all but I did do a lot of hunting around and came to the conclusion that a Puig screen might be the best compromise, but cannot vouch for this as did not get round to buying.

 

I had the Dart screen on my America, took a lot of wind blast off my chest. Worked a lot better than the size actually suggests

 

God day from Oz. I had a Dart screen on my 01 T100 and I found it improved comfort on long rides, without any head buffetting arising or any wind noise problems. I transferred it to my T120 when I bought it and it was also ok.
I was wanting a better look though, so a bought the Emgo fairing which I find is pretty good - see photo. I do regular 450-500km day rides and find I don’t get any upper body stiffness, which ain’t bad considering I’m 60. I like the way it looks too.

 

I've just fitted a Dart classic to my speedmaster 2018, after trying a puig screen taken off my vn900, and the dart is way better. It's a little taller but makes a huge difference and takes almost all wind off the body from 30 to 80 just hitting around the bottom of a full face helmet.

 

I've just fitted a Dart classic to my speedmaster 2018, after trying a puig screen taken off my vn900, and the dart is way better. It's a little taller but makes a huge difference and takes almost all wind off the body from 30 to 80 just hitting around the bottom of a full face helmet.

 

Dart classic Flyscreen looks and works good

 

Unfortunately I don’t think you’ll get what you’re after although styling is of course personal choice. I had the Triumph long haul screen on my 865 Bonneville which created buffeting at anything over 40mph then put a Dart flyscreen on which was better and ‘OK’ up to 60 but neither were any good for long distance main road speeds of +60/70 mph. I’ve got a Street Scrambler with the Triumph touring screen on which is again OK up to 60 ish but not any higher speed for anything other than a short hop. The Triumph touring screen is only slightly larger than the fly screen and suits my height (5ft 11") but wouldn't be comfortable for anyone shorter as when I duck down a little bit the blast & wind noise hits my helmet ... I had a Madstad on my Tiger 800 which was excellent at all speeds +++mph.. but looks ugly even on the Tiger style bike.. they do one for a Bonneville which is probably the best for function but again (I think ) spoils the Bonneville/ classic styling... its whether function over styling takes the priority so good luck with the search.

 

Recently purchased a 2012 Bonneville T-100 and need a windshield. I'm 5'8" and prefer being able to look over the top of the shield and have wind and bugs go over my head. Read a few reports and may look at Puig Ranger and Dart Classic. Am I on the right track in my search.

 

If wind fatigue is a factor you want to eliminate, you might try raising or lowering the bars , as this will affect wind/pressure on chest,shoulders and head, another thing that affects rider fatigue levels more than most riders expect is the bikes gearing ! Its very tiring if the bike is slow in top gear ! What I mean by this is - if bike is geared Too tall or lacks the torque to pull/accelerate for hills or overtaking it can tire the rider more than he / she realises ! So a screen may not be the cure all ! I have had naked bikes that were great and faired bikes that were terrible for this !
So you n3d to work it out ! Try riding friends bike's which have differing combination of bars , fairings , screen or gearing and see what's best for you !
My 2009 Bonneville America is much better , less tiring to ride since Dyno tuning to suit engine work (905cc & porting) before that I geared it down to get engine rpms up in to the working torque range (2 teeth more on rear sprocket).
Good luck ! It took me 8 years ! New seat handle bar risers screen suspension changes engine re-bore porting and a screen ! Cost over 8 year's about $3,500 odd !!!

Cheers capt

Oh and it's a keeper now !

 

Hi,
I had an america LT with the quick release screen an this was excellent,
Motorway speeds in a full face helmet with visor open was easily manageable..... i have changed it for the new speedmaster with screen and get a bit of bobbling...doing some touring early in june so will get a better idea of whether i need to improve it

 

Suggest don't get one of these Triumph Long Haul screens... I had it on my 2014 Bonnie and caused buffeting and wind disruption to my head at anything over 40mph ... worse the faster you went... I'm 5 ft 11" if that any help !

 

I recently fitted this colour coded genuine flyscreen purely for looks but it does actually keep the wind off a little,

 

Having read all the posts here I think its about time Triumph got their arse in gear in whichever department deals with screens/airflow. I have owned 2 Tiger 800's (2011/2016) and a 2013 America all of which gave either buffeting or horrendous wind noise from any screen available from Triumph. After lots of research and correspondence (and expense) I got the buffeting and noise level down to an acceptable compromise with a Givi Airflow on the Tigers (my mate is currently using it in his Tiger 800) and a screen sourced from Ebay which we altered to get to a user friendly state. Both screens were under £150.00 so Triumph's prices, especially for something that doesn't work are way over the top.
If you consider this topic then combine it with the amount of posts on corrosion happening to very expensive almost new motorcycles Triumph's standards are appalling! especially with the attitude of some of the Triumph dealers. In my opinion Triumph are resting on their laurels, I just hope that someone at Triumph reads the complaints on the forum.
No longer Triumph owner Pete.

 

These last two comments have completely moved the thread away from the subject of screens. Please do not add any subject comments that are not relevant to the thread. There are no doubt other threads on the subject of corrosion.
I am sure this diversion was done without realisation to the movement to another subject, let’s get back to screens.