Anti Fogging Visor Treatments???

I use Rain-X Anti Fog
Amazon £5-00


When put on correct it lasts a good while - a few hours riding

Although I never have a problem with the pin-lock system so long as there is a seal all the way round

 

Someone will be along shortly recommending potatoes/vinegar and Fairy Liquid

 

I use potatoes/vinegar and Fairy Liquid

 

Likewise, I've never had a problem with a pin-lock when adjusted properly to ensure a good seal.

Be careful with the Rain-X. I've heard stories of them reacting with the plastic visor and turning them brittle as it's designed for glass. I did use their rain repellent but have now switched to Nikwax Visor proof(http://www.nikwax.com/en-gb/products/productdetail.php?productid=248)

 

I remember a pink wax stick used the exact same way - I used to use it on my skin goggles and it lasted all day. Great stuff but can no longer find it. For my bike solved the problem by moving to southern Arizona.

 

Firstly, I personally would not use RainX. It will corrode the protective film on your visor. I have personal experience with that. Pinlock- the pins that you slip on the pinlock inner shield are eccentric meaning they are oblong. Try turning them around before attaching pinlock shield so that the silicone bead of the pinlock shield makes a tight seal.

 

Firstly, I personally would not use RainX. It will corrode the protective film on your visor. I have personal experience with that. Pinlock- the pins that you slip on the pinlock inner shield are eccentric meaning they are oblong. Try turning them around before attaching pinlock shield so that the silicone bead of the pinlock shield makes a tight seal.

Wow!

 

Always use Pinlock on my visors and never had a problem with misting. It’s my specs i have a problem with.

 

What water??? Looks like the sun I encounter here!

RainX make some products specifically for plastic that are fine on the visor/windscreen, but unless it's specifically for plastic I'd stay away. My windscreen manufacturer specifically warns against using RainX.

 

I don't ride in the cold/rain. Have not had a fogging problem for years.

 

Never had a problem with any of the pinlock systems that I’ve used over the years

 

Fairy liquid or some other brand of washing up liquid a little smear on end of finger works a treat same for glasses. That bikini needs adjustment

 

Never had a problem with with pin lock in my Arai, but I also do on my shoei gt Air. The 'air' bit is a bit of a lie, because you cannot open the visor to let sir in, it had to be half opened then your blasted with air. Poor design imho. Still trying to come up with a solution.

Think it's more a problem with design than with pin lock.

 

For my specs I use Optifog cloths, it takes a couple of treatments but give the glasses a wipe before a ride and they stay very clear
OptiFog £5.99 a cloth but lasts a good few months
Sold from RX Sport

 

ditto...not a problem with pinlock on other helmets ..even other shoei ... really disappointed gt air ...solution ..sold the helmet and bought a bell ster instead!

 

Very comfortable and quiet, but ventilation is poor, and drop down visor is useless when cold, just steams up too.
When warm and dry, too hot unless open visor, then gap too wide!!!!
Really liked it to start with, then faults are niggling me.