Scratch Removal

looking for advice ive noticed my triples paintwork had lots of minor scratches and swirl marks ive now bought grit guards and stopped using sponges,got a halfords brand microfibre dreadlock type car wash sponge i will use but have seen conflicting advice on removal of scratches/swirlmarks,is it worth paying somebody to professionaly remove the scratches and or detail the bike,ive got bottle of tcut but have read this is too abrasive seen simoniz website advice on using their paint restorer and waxing but im unsure whether to diy and risk further damage or get it done professionally,its just annoying me and seems like its just the clearcoat that has the fine scratches any product recommendations from personal experience welcome.

 

llike anything else on web there are umpteen different opinions,the autoglym super resin polish seems s good option i do remember using it on a ypvs350 well over a decade ago.

 

I wouldn't class it as a scratch if you get my drift just lots of fine swirlmarks and fine scratches by look of it just the clear coat, don't think its actually down as deep as paint layer itself I don't want to use anything too abrasive hence thinking autoglym super resin or similar then maybe a wax of some sort to protect bodywork.

 

well it has went a wee bit off topic to say the least but no harm done and no animals were harmed l.o.l,ive looked at a few detailing forums and just bought the autoglym super resin polish it seem one of the best rated and not too abrasive which is a big thing,ive not polished any of my bikes including the r1 and the zrx for years so maybe the paintwork on my speedy was already scored and covered up before i bought it,ive got halfords microfibre type sponge so going to use that rather than normal type plus the gritguards for the wash bucket hopefully that will help keep the bodywork decent,ive won a sp engineering silencer for good price on fleabay so just waiting for delivery to get a tad more volume on bike.

 

one of them next on shopping list the sp can arrived with strap but no bracket to fit onto bike,just been to local council skip got alumminium sheet so grinder and file time to make bracket,looks like the angle of can bracket will fit behind where the rear brake cyclinder etc bolt to frame need to look at pics of other cans and make something up.

 

wow that's some gloss i need to get my finger out,I've got the super resin polish n applicator I've just finished nightshifts so away to stranraer static,get back Sunday so wash n polish time then.