Featured New Norman Hyde Pipes

New classic look Hyde pipes fitted earlier today not over loud with the baffles in deeper tone if anything.

 

Cheers Curly I don't understand why there are duplicates of the last pic I only uploaded it once honest Admin I did try to delete but to no avail

 

Cheers Dave
A very easy job had to drill the hole a taj for the mute screws to fit but other than that very pleased these are modified as the mounting bracket on the pipe to footpeg is now fixed welded and finished in the same chrome as they had some issues with earlier ones not fitting clearing swinging arm
HBS 505 if anyone needs part number

 

Hi and thanks for the positive comments the rear axle nuts are easily accessible with these on removal not required to torque and this kit is compatible with centre stand as they come with a bracket and a bolt to fit onto the left pipe comes with instructions all that's needed is you fit the original rubber bung into this bracket easy job

 

Cheers Jj,
As you probably guessed I like to play around with stuff looked at arrow but was not sure about the looks one thing that put me off was the arrow decal on the end can the 412 Progressive shocks I managed to get off Evilbay for a very good price
love the megaphone look modern classic style.

 

Hi Matthew,
yes they do them in black heres the link https://normanhyde.co.uk/2009-classic-silencer-pair-3834.html
Not overloud without the baffle until you wind the throttle open then it done me head in so baffle in for me nice deep tone and louder than the tors I had on there but not over the top like

 

Sure thing im putting some rear footpeg deletes on later today I will mock something up so it shows the access to the rear axle nut the front headers are stock not changed if you have the T100 the pies are different ie the angle where the slip on attaches they also do a pipe to fit this and in black or chrome the hangar bracket on the pipe is now fixed welded as they had some issues with the earlier ones not clearing the swing arm these ones have plenty of clearance.

 

Hi I reckon if yours is a T 100 then it may not clear the rear axle nut however its only a five minuite job to slide the pipe off to torque that rear axle up adjust chain or clean rear wheel I regularly remove the pipes to do these things heres a few side on shots paddock stand also clears these pipes too

 

No worries happy to help there Ive had many different pipes over the years on different bikes but I have to say for looks and sound with a perfect finish these are the best they do come with a bit of a price tag I agree BTW Im not a salesman for Mr Hyde