Featured Speedmaster Sprocket Cover

Got this off fleabay a few months ago for £30
Gonna chop/cut/reshape it to some sort of cross between the ones below
Will post pictures of my progress as I'm going but don't hold your breath as I'm doing it at work and depending how busy we are as to how quickly I can do it Johnny Cactus....YouTube Delboy...YouTube Delboy....YouTube wish me luck

 

BLACK!!!! OH YEAH
But I'm gonna polish the top edge of the fins to highlight them

 

Ok....so this is what I'm gonna do cut it to shape with elongated holes which I will cover in some sort of mesh from behind
As you might have guessed I'm very very busy at work
So I've made a start air deburring tool and a hacksaw for starters

 

Taking the webbing out of the inside of the cover so I can mount the mesh in there is proving to be a reet bastid

 

That was a bit of a bugger
But got there in the end
Time to go home after a hard days work

 

Aye it's a cushy number

 

It's now tamper proof

 

Cutting and filing the slots
Bit more filing and dressing to do tomorrow then hopefully get a few coats of satin BLACK paint on and hang it up somewhere to dry over the weekend
Just gotta find some suitable mesh from somewhere
Either aluminium or stainless steel
Probably cut up an air filter of some sort

 

First couple of coats applied
Another coat this afternoon and leave to dry over the weekend
Found some suitable mesh on an air filter
Should be finished Monday

 

Two days messing about at work
Reckon if I'd timed myself properly 6hrs ish...not sure

 

There not teardrops
My mate at work...Mark....him with the rocket 3....who keeps saying I can have a go of his bike but never actually gets round to letting me go on it
He came up with the idea and he calls them PYRO DIRECTIONAL APERTURES and yes he's a bit anal...even his wife says it

 

Right....here's what to do...have a couple of pints and a jack Daniels...then draw a picture and post it on here...simples

 

Know what you mean mate but happy enough with the way it looks