Sprint 2002 Sprint 955i Seized Chain Hub???

http://www.bowl-of-mice.co.uk/ST_Hub.html

 

Lack of courtesy or being offensive to members? As it's one of the friendliest forums not so much of the latter

 

Its also the people that follow along looking for an answer to their problem. The search engine brings them here, and they read through 25 entries to find... no answer.

Please finish your threads

 

Must be honest @Smilinjack & @Sprinter, it seems to be a common problem on most forums not just here and it does tend to make you that little bit more reluctant to take the time to post an answer that you think may help someone.

But this by far one of the better forums I have come across for the friendly helpful folks on here.

 

This should be stripped every 12k or 2 years whichever comes 1st.
Rarely gets done especially by back street dealers or those who home service.
So now it is very common. You may now need a F&%k off hammer to get it out.
I suspect the suspension linkages to be shot too.

 

Sprinter that hub walk through is awesome. Thank you. I was putting the bike into a garage to get it done cos its my only transport for work but I may give it ago myself now. How long does that take you 1st attempt ?

 

If you have the correct tools (you will need a very large circlip plyers and 46mm socket) its not too bad.
If you have not then its a right bugger of a job

 

I got lumbered with a new graduate engineer ( grade 8 if that means anything to anyone ) a few years ago.
I was put working with him as he was more highly qualified than I am !!!
So I spend the first 6 weeks on the job explaining the niceties of assembling and aligning / levelling pumps and their associated pipework & wiring.

This preliminary work involved
"How to hold a spanner"
" Which way to turn the nut or bolt " this continued months after he was leading his own team.
" How not to hold the spanner so it doesn't take all the corners off the bolt head "
" How to use a spirit level "
" Not to cable tie Electrical power cables to HOT Pipework "
" Not to forget the thread lubricant when assembling Stainless bolts into stainless pump bodies "
" Not to kink nylon air lines "

Then when I had learned all I could, I was put with another new starter !

My first partner was given a team of 3 other lads who were new to the job for him to teach and bring along ......... I worry a lot about the safety of industry if he was any sort of an example, and am REALLY GLAD I'm now retired

 

My brother has a degree
I have a spirit level

 

well I do know a gynaecologist. He's brilliant! Managed to do the Cylinder head gasket on a Vauxhall Corsa.
Whats more amazing is he done it all through the exhaust pipe