675 Street Triple 2010 Tail Tidy

Has anybody had any issues re fitting a tail tidy to the two high-level silencered Street Triple? I know R & G and Evotech do them but from their pics, it is hard to tell whether or not the number plate (standard size) will foul on the silencers?!?! Does anybody happen to know?

Many thanks in advance.

 

Hello Bill

Thanks for that, more food for thought.

 

Hi Adam

Many thanks for that. The R & G one is the one I'm preferring at the moment. Did you space the silencers out from standard? According to the instructions, there should be some spacers included in the kit to enable you to do that?

 

Finally took the plunge and fitted the R & G tail tidy, including the spacers for the silencers, which are standard. Have also used the standard indicators and all worked pretty well. I'm not the world's best at electrics but wiring up the number plate light, tail light and indicators was easy.

The spacers for the silencers were OK but the silencer brackets needed a little judicious bending. I have re-used the standard number plate which is 240 mms wide and now there is about a 1 cm gap from the number plate to the silencers so all should be good! Thanks all for your help.