Tiger 1050 Main Stand Bolt.

Hi Guys.
Just been out and cleaned ,checked bike over . On raising bike on my stand I can see what appears to be a bolt missing on the main stand left side directly below left foot peg. TBH I've not noticed this before can any one suggest this is the norm or infact there is a bolt missing. I've shone torch inside hole and cannot see a thread thread checked righ hand side and you can see that a bolt is present so I'm assuming it locates from the right side with a internal thread on the left side

 

Hi Guys.
Just checked again there is a single tube on main stand also there is a washer and split pin on right hand side. But if you look at my photo there is nothing on left side. From the left side I can put a screw driver into hole for about 8 " this is making me think the bolt is hollow and is actually in place. The bike is currently on main stand and seems to be causing no problems. I'm going to drop it off and see if main stand drops on left side this indicating that I fact a bolt may be missing. Bloody hell I wish I hadn't noticed it . Thanks for replys

 

No play at all everything seems ok . Just not noticed this before .